====== SNMP ======

The Internet Gate has a built-in SNMPv2 client allowing remote SNMP browsers to view/edit certain configuration values. Read more about SNMP on [[wp>SNMP|Wikipedia]].

MIBS supported are:
  * RFC1213
  * Custom MIB

:!: To allow remote (WAN/Internet) SNMP servers access to your unit you must enable **Remote configuration (SNMP)** in "Allowed applications" on the [[web GUI:security profile]] page.

:!: To allow local (LAN) SNMP servers access to your unit you must enable **Administration (SNMP)** in "Applications from inside" on the [[web GUI:security profile]] page.

You configure SNMP community and server address settings on the [[:web GUI:Administration page]].

You configure SNMP logging on the [[:web GUI:Log configuration page]].

===== Custom MIB =====
There is a custom MIB for the Internet Gate allowing access to some non-standard, Internet Gate-specific OID-s. To be able to use those values you need to install the custom MIB in your MIB browser.

Base OID for the custom MIB is .1.3.6.1.4.1.1218.1

==== IXlog ====
Allows you to see latest entry logged on unit's system log, and select what log events should automatically generate SNMP traps with OID .1.3.6.1.4.1.1218.1.5.0.0. Same configuration as on [[:web GUI:log configuration page#Forward to SNMP server|Log configuration page]].

==== IXcall ====
Allows you to see call quality measurements (packet loss, MOS score) for last 10 SIP calls made through the Internet Gate.