product_overview:back_panel [IG Manual]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Back Panel ======
{{:ix78_back.jpg}}\\
Note: Actual back panel of your Internet Gate model might differ from image above. Certain ports might be missing on cheaper models.

===== LINE =====
<if adsl>
[[:ADSL:start|ADSL]] connector, used as WAN port for connecting Internet Gate to the Internet using an ADSL/ADSL2/ADSL2+ connection.
</if>
<if fxo>
[[:phone ports:start|FXO]] connector, used to connect Internet Gate to global telephone network to make and receive ordinary telephone calls.
</if>
<if !adsl and !fxo>Not used by your Internet Gate.</if>

===== PH2, PH1 =====
<if fxs>
[[:phone ports:start|FXS]] connectors allowing connection of up to 5 analogue telephones per port, converting them into IP-phones. PH1 and PH2 can have different SIP addresses (telephone numbers).
<else>
Not used by your Internet Gate.
</if>

<if et==5>
===== ET0/WAN =====
</if>
<if et==5 and adsl>
If ADSL is used as WAN connection ET0 is on the same subnet as ports ET1, ET2 and ET3. It can however be converted to be the WAN port on the [[:web GUI:Network page]] (disabling ADSL).
</if>
<if et==5 and !adsl>
ET0 is the WAN port for connecting Internet Gate to the Internet using Ethernet.
</if>

===== ET1, ET2, ET3 =====
Ethernet switch for connecting clients on your LAN to Internet Gate. All three ports are on the same subnet.

===== ET4 =====
Ethernet port on a different subnet than ET1/2/3, allowing use of a second LAN, or a [[:network:DMZ]].

<if usb>
===== USB =====
USB 2.0 master port accepting connection of [[:misc:USB|USB memory]].
</if>

<if air>
===== Antenna =====
[[:wireless|Wireless access point]] with up to three virtual access points (different SSID-s and encryption), on a different subnet as LAN, or bridged to same subnet (controlled on [[:web GUI:Network page]]).
</if>

===== DC, ON =====
Power supply connector and power button.