http://wiki.igmanual.com/ 2026-04-05T10:50:49+02:00 http://wiki.igmanual.com/ http://wiki.igmanual.com/lib/images/favicon.ico text/html 2010-11-19T14:35:48+02:00 http://wiki.igmanual.com/doku.php?id=settings_and_administration:apply_and_save_permanently&rev=1290173748&do=diff Apply :!: On all configuration webpages you must click Apply to save your changes. Apply saves your changes. Apply & Return saves your changes and returns to the main menu. If you reload the webpage, or browse to some other webpage, your changes will be lost. text/html 2011-05-19T16:21:08+02:00 http://wiki.igmanual.com/doku.php?id=settings_and_administration:backup_files&rev=1305814868&do=diff You can save your Internet Gate configuration to a file on your PC for later reload. It is very convenient to do if you have to perform a reset to factory defaults, or want to copy one unit's settings to another one. All your settings are saved to one PC file that can be reloaded at a later time. text/html 2010-11-03T17:17:53+02:00 http://wiki.igmanual.com/doku.php?id=settings_and_administration:debug_file&rev=1288801073&do=diff Collect If an error occurs debug information is collected automatically in the Internet Gate. You can also collect debug information manually using the “Collect debug info now” button on the Administration page. (Visible only if no debug info currently collected.) text/html 2010-11-17T12:51:08+02:00 http://wiki.igmanual.com/doku.php?id=settings_and_administration:factory_defaults&rev=1289994668&do=diff To reset the Internet Gate to factory default settings (same configuration as when delivered from factory): * Press and hold SET for 2 seconds to enter set-up mode. * Press SEL repeatedly until RST lights up. * Press SET. Now “CLEAR ALL” is displayed, followed by “no”. * Press SEL to change to “YES” * Press SET to reset all settings and go back to factory default settings. text/html 2012-07-09T10:09:28+02:00 http://wiki.igmanual.com/doku.php?id=settings_and_administration:front_panel_configuration&rev=1341821368&do=diff * By holding the SET button pressed on the front panel you enter Setup mode. * As soon as SET button is pressed the firmware release number is displayed. If TS is lit after the firmware release number it indicates a test version – the firmware running in this unit is not a final released firmware, but a Beta- or pre-release. * After 3 seconds AD is lit – now you can release SET button. text/html 2011-06-01T09:17:03+02:00 http://wiki.igmanual.com/doku.php?id=settings_and_administration:installation&rev=1306912623&do=diff This topic describes the installation procedure for the most common installation scenario where the Internet Gate is used as a router on a local network to share a single connection to the Internet. For other installation scenarios please refer to the installation information provided with your unit. text/html 2010-11-11T10:59:30+02:00 http://wiki.igmanual.com/doku.php?id=settings_and_administration:snmp&rev=1289469570&do=diff The Internet Gate has a built-in SNMPv2 client allowing remote SNMP browsers to view/edit certain configuration values. Read more about SNMP on Wikipedia. MIBS supported are: * RFC1213 * Custom MIB :!: To allow remote (WAN/Internet) SNMP servers access to your unit you must enable Remote configuration (SNMP) in “Allowed applications” on the security profile page. text/html 2011-05-10T17:38:03+02:00 http://wiki.igmanual.com/doku.php?id=settings_and_administration:start&rev=1305041883&do=diff The Internet Gate can be configured using: Front panel configuration Web interface (GUI) Telnet Command Line Interface (CLI) Remote Configuration by TR-069 Remote Configuration by SNMP Related topics: Apply and Save permanently Backup files text/html 2010-12-15T10:35:01+02:00 http://wiki.igmanual.com/doku.php?id=settings_and_administration:telnet_cli&rev=1292405701&do=diff The Internet Gate has a powerful Command Line Interface, accessible through wp>Telnet, allowing advanced users make complex configurations not possible using the web GUI. For advanced users only! Incorrect CLI commands can render your unit uncontactable or even permanently damaged! :!: By default Internet Gate's firewall stops all attempts of connecting to the Telnet CLI from the outside (WAN/Internet) network.