Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| troubleshooting:internet_access_problems [2010/11/25 14:30] – mats | troubleshooting:internet_access_problems [2010/11/26 08:58] (current) – mats | ||
|---|---|---|---|
| Line 3: | Line 3: | ||
| On the front panel display the text '' | On the front panel display the text '' | ||
| If this is not the case, you have probably one of the following display appearances: | If this is not the case, you have probably one of the following display appearances: | ||
| - | | + | |
| - | * If using Ethernet as the WAN port:\\ Check the cables. When an Ethernet link is established, | + | * If using Ethernet as the WAN port:\\ Check the cables |
| * If using ADSL as the WAN port: \\ Check the ADSL cables and connectors, and proceed by the [[adsl: | * If using ADSL as the WAN port: \\ Check the ADSL cables and connectors, and proceed by the [[adsl: | ||
| - | - a rolling figure-of-eight, | + | |
| - | * Check the settings of the VPI/VCI values on the [[web GUI:Network page]]. | + | * one rolling figure-of-eight, |
| - | * If using the **Access type** //PPPoE// or //PPPoA// on the [[web GUI:Network page]], check the settings of the **User** and **Password**. | + | * Be patient - it may take a minute or two before the IP address has been acquired. |
| - | * Check if there is any kind of error message in the system log. | + | * If using DHCP: One may click the " |
| + | * Check the settings of the **VPI**/**VCI** values on the [[web_gui:network_page# | ||
| + | * If using the **Access type** //PPPoE// or //PPPoA// on the [[web_gui:network_page# | ||
| + | * Is the **Access type** on the [[web_gui: | ||
| + | * Check if there is any kind of error message in the [[web_gui: | ||
| + | \\ | ||
| If you have problems accessing the Internet from a PC on the LAN, follow this procedure: | If you have problems accessing the Internet from a PC on the LAN, follow this procedure: | ||
| (This assumes that you want to use the Internet Gate as a router and use it to assign IP addresses to all the devices on your local network.) | (This assumes that you want to use the Internet Gate as a router and use it to assign IP addresses to all the devices on your local network.) | ||
| - | + | - Check that there is a working connection between the PC and the Internet Gate, follow the instructions [[troubleshooting: | |
| - | - Check the Internet (WAN) connection as described above. You must have the '' | + | - Check the Internet (WAN) connection |
| - | - Check that there is Ethernet link between | + | - Check that your PC uses Internet Gate as its //Default Gateway// |
| - | - Reboot | + | - Check that your PC uses Internet Gate as its //DNS server// |
| - | - Turn off any existing DHCP server on your local network. | + | |
| - | - Make sure all computers connected to the Internet Gate are configured to use dynamic IP addressing. You may also try to restart the computer, or make the operating system renew the dynamic IP address by DHCP (enter " | + | |
| - | - Try surfing to the Internet Gate. Start your web browser and surf to the Internet Gate web pages. (Default IP address: 192.168.0.1.) | + | |
| - | - Log in. | + | |
| - | - Click Network. The [[web GUI:Network page]] appears. | + | |
