Differences

This shows you the differences between two versions of the page.

--- vpn:easyclient [2010/11/22 11:36] – mats
+++ vpn:easyclient [2010/11/22 12:31] (current) – mats
@@ Line 17: / Line 17: @@
 Therefore you are recommended to:
-  * Enable EasyClient for connections there you are a client connecting to a server.
+  * Enable EasyClient for connections where you are a client connecting to a server.
-  * Disable EasyClient for connections there you are the server, or are equal to the other end
+  * Disable EasyClient for connections where you are the server, or are equal to the other end
-If the other end of the IPSec connection is other brand than Internet Gate then configure it as if it would connect to a single PC running IPSec software, thus:
+\\
-  * if there is a local network subnet address field to be specified then leave it empty, or enter your client's global IP address, depending on brand.
-  * if there is a local network subnet mask field then leave it empty, or enter 255.255.255.255 depending on brand.
+===== Configuring the remote end =====
+If the other end of the IPSec connection is another brand than Internet Gate then configure it as if it would connect to a single PC running IPSec software, thus:
+  * if there is a local network subnet address field to be specified, then leave it empty, or enter your client's global IP address, depending on brand.
+  * if there is a local network subnet mask field, then leave it empty, or enter 255.255.255.255 depending on brand.