Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
| web_gui:wan_config [2010/11/03 16:32] – created tibor | web_gui:wan_config [2011/08/09 02:16] (current) – kalle | ||
|---|---|---|---|
| Line 8: | Line 8: | ||
| :!: You must change the admin password in the unit before you make the web configuration pages available on the Internet! | :!: You must change the admin password in the unit before you make the web configuration pages available on the Internet! | ||
| - | Once enabled in a security profile, the web configuration interface is available from any computer connected on the Internet on the global IP address followed by :66 (or 67 for https) | + | Once enabled in a security profile, the web configuration interface is available from any computer connected on the Internet on the global IP address followed by :66 (or 78 for https) |
| Example: %%http:// | Example: %%http:// | ||
| Line 15: | Line 15: | ||
| - On the [[Security page]] select the [[security profile]] you want to enable remote configuration for. | - On the [[Security page]] select the [[security profile]] you want to enable remote configuration for. | ||
| - Check " | - Check " | ||
| - | - Enter an external IP address and mask to only allow remote configuration from specific IP addresses. | + | - Optionally, enter an external IP address and mask to only allow remote configuration from specific IP addresses |
| - | If you want to be able to access | + | Use a strong password |
| - | You can also use the more secure https protocol | + | It is more secure |
| - | ^ :!: Making | + | ^ :!: Remember that there is risk in making |
