Quick links:
Product Overview
Installation
Settings and Administration
ADSL
SIP Support
Telephone ports
Network
Firewall
Wireless
VPN
Misc
Licenses
Troubleshooting
[[front_panel]]
Differences
This shows you the differences between two versions of the page.
|
front_panel [2010/10/28 15:22] tibor created |
— (current) | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ====== Front Panel ====== | ||
| - | |||
| - | ^ Indicators: ^^ | ||
| - | | AIR | Wireless (802.11b/g) | | ||
| - | | PH1 and PH2 | First and second telephone port (FXS) indicator | | ||
| - | | ::: | OFF – Phone not registered | | ||
| - | | ::: | Steady GREEN – Phone registered | | ||
| - | | ::: | Flashing RED – Dialing | | ||
| - | | ::: | Steady RED – In use | | ||
| - | | ::: | GREEN / RED flashing – Message waiting | | ||
| - | | ::: | RED strobe (1.3s off and 0.3s on) – Unavailable | | ||
| - | | LINE | Telephony gateway indicator | | ||
| - | | ::: | OFF – Not in use | | ||
| - | | ::: | Slow RED flash – Dialing / ringing | | ||
| - | | ::: | Fast RED flash – Extension selection | | ||
| - | | ::: | Steady RED – In use | | ||
| - | | ::: | RED strobe (1.3s off and 0.3s on) – Unavailable | | ||
| - | | USB | USB memory stick connected | | ||
| - | | ET1-ET4 | Ethernet interface connected | | ||
| - | | WAN | Status of the Internet connection | | ||
| - | |||
| - | Light - The interface is connected. | ||
| - | |||
| - | No light - The interface is not in use. | ||
| - | |||
| - | Blinking - Indicates that data is being sent or received. | ||
| - | |||
| - | ^ Keys: ^^ | ||
| - | | SET | Press and hold for two seconds to enter the set-up mode | | ||
| - | | SEL | Press to select between different displays/values. Press for two seconds to cancel any set-up. | | ||
| - | | ALT | Press to select firewall security profile. Press and hold for two seconds to allow remote configuration. | | ||
| - | |||
| - | ^ Display: ^^ | ||
| - | | AD | Displays IP address | | ||
| - | | CFG | Configure IP address | | ||
| - | | DHP | - | | ||
| - | | RST | Reset all configurations to factory defaults | | ||
| - | | LQ | Line quality (SNR margin) | | ||
| - | | TS | Transmit speed (Kbps) | | ||
| - | | RS | Receive speed (Mbps) | | ||
