Quick links:
Product Overview
Installation
Settings and Administration
ADSL
SIP Support
Telephone ports
Network
Firewall
Wireless
VPN
Misc
Licenses
Troubleshooting
[[telnet_cli]]
Differences
This shows you the differences between two versions of the page.
|
telnet_cli [2010/11/08 13:49] tibor created |
— (current) | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ====== Telnet CLI ====== | ||
| - | The Internet Gate has a powerful Command Line Interface, accessible through Telnet, allowing advanced users make complex configurations not possible using the [[:web GUI:main menu|web GUI]]. | ||
| - | |||
| - | ^ For advanced users only! ^ | ||
| - | | Incorrect CLI commands can render your unit uncontactable or even permanently damaged! | | ||
| - | |||
| - | :!: By default Internet Gate's firewall stops all attempts of connecting to the Telnet CLI. Before you can use the CLI you must enable Telnet access: | ||
| - | * for remote (WAN/Internet) access enable **Remote configuration (Telnet)** on [[*web GUI:security profile]] | ||
| - | * for local (LAN) access enable **Administration (Telnet)** on [[*web GUI:security profile]] | ||
| - | |||
| - | ===== Login ===== | ||
| - | Log in to Telnet CLI by opening a telnet connection to one of Internet Gate's addresses: **%%telnet 192.168.0.1%%** | ||
| - | |||
| - | Username is **admin** and password is the same as admin's password for access of the [[:web GUI:start|web GUI]]. | ||
