Quick links:
Product Overview
Installation
Settings and Administration
ADSL
SIP Support
Telephone ports
Network
Firewall
Wireless
VPN
Misc
Licenses
Troubleshooting
[[telnet_cli]]
This is an old revision of the document!
Telnet CLI
The Internet Gate has a powerful Command Line Interface, accessible through Telnet, allowing advanced users make complex configurations not possible using the web GUI.
| For advanced users only! |
|---|
| Incorrect CLI commands can render your unit uncontactable or even permanently damaged! |
By default Internet Gate's firewall stops all attempts of connecting to the Telnet CLI. Before you can use the CLI you must enable Telnet access:
- for remote (WAN/Internet) access enable Remote configuration (Telnet) on security profile
- for local (LAN) access enable Administration (Telnet) on security profile
Login
Log in to Telnet CLI by opening a telnet connection to one of Internet Gate's addresses: telnet 192.168.0.1
Username is admin and password is the same as admin's password for access of the web GUI.
