This is an old revision of the document!

Front Panel

Indicators:
AIR	Wireless (802.11b/g)
PH1 and PH2	First and second telephone port (FXS) indicator
	OFF – Phone not registered
	Steady GREEN – Phone registered
	Flashing RED – Dialing
	Steady RED – In use
	GREEN / RED flashing – Message waiting
	RED strobe (1.3s off and 0.3s on) – Unavailable
LINE	Telephony gateway indicator
	OFF – Not in use
	Slow RED flash – Dialing / ringing
	Fast RED flash – Extension selection
	Steady RED – In use
	RED strobe (1.3s off and 0.3s on) – Unavailable
USB	USB memory stick connected
ET1-ET4	Ethernet interface connected
WAN	Status of the Internet connection

Light - The interface is connected.

No light - The interface is not in use.

Blinking - Indicates that data is being sent or received.

Keys:
SET	Press and hold for two seconds to enter the set-up mode
SEL	Press to select between different displays/values. Press for two seconds to cancel any set-up.
ALT	Press to select firewall security profile. Press and hold for two seconds to allow remote configuration.

:!: Keys can be disabled on the Administration page.

Display:
AD	Displays IP address
CFG	Configure IP address
DHP	-
RST	Reset all configurations to factory defaults
LQ	Line quality (SNR margin)
TS	Transmit speed (Kbps)
RS	Receive speed (Mbps)

product_overview/front_panel.1288788075.txt.gz · Last modified: 2010/11/03 13:41 by tibor