Technical Specification

General:
System Support	OS Independent
Certifications	CE, FCC
Remote Configuration	Remote management and remote firmware upgrading
Protocol	IPSec, IKE, GRE, L2TP, PPTP, PPPoE, PPPoA, IP, ICMP, TCP, UDP, FTP, SIP, CHAP, PAP, SNTP, POP3, DNS
Management:
Firmware Upgradable	Manual check for new release
Configuration	Built-in web server, Telnet
DHCP	Client and Server
Logs	Network status. System and security log. Logs can be sent to an external syslog server.
Console:
Physical Dimension	165x154x33 mm
Weight	0,3 kg
Display	Three Digit LED for speed and status information
Media Interfaces (Ports)	ET 5 x 10/100 Base-T (RJ 45), IEEE 802.3 and 802.3u Compliant
	PH1, PH2: RJ 11
	LINE: RJ 11
Electronic Specifications	Input Power 12V DC, 1 A
Cabling Type	10BaseT: UTP Category 3 or better
	100BaseTX: UTP Category 5 or better
	USB: USB Cable
ADSL Modem:
Security:
Firewall	General rule based packet filtering, stateful inspection, proxy, port redirection, NAT+NAPT, DMZ Hosting
Password protection	Blocks unauthorised users from changing configuration settings
VPN	VPN pass through
Protocols:	IPSec (ESP tunneling mode, one client), PPTP (one client), SSH (multiple clients)
Wireless:
Wireless	IEEE 54 Mbps
Wireless Access Point Security	WEP/WPA/WPA2, MAC address filtering
Integrated Wireless Access Point	802.11g
Session Initiation Protocol (SIP):
SIP Support	IETF protocol for sessions over Internet (e.g. IP Telephony), RFC2543
Transport Protocol	UDP, TCP
SIP Proxy	Firewall awareness (controls firewall), Parallel Forking, Session Timer
SIP Registrar	Up to 5 users, upgrades available to allow for a larger number of registered users.
SIP Registrar	SIP clients are automatically registered allowing the proxy to route the requests correctly and to open/route the media streams to the correct user.

product_overview/technical_specification.txt · Last modified: 2010/12/15 11:32 by mats

Show pagesource Old revisions