Differences

This shows you the differences between two versions of the page.

product_overview:back_panel [2010/11/10 11:58]
tibor
product_overview:back_panel [2010/11/18 13:19] (current)
tibor
Line 1: Line 1:
====== Back Panel ====== ====== Back Panel ======
-{{:ix78_back.jpg}}+{{:ix78_back.jpg}}\\
Note: Actual back panel of your Internet Gate model might differ from image above. Certain ports might be missing on cheaper models. Note: Actual back panel of your Internet Gate model might differ from image above. Certain ports might be missing on cheaper models.
===== LINE ===== ===== LINE =====
-<if adsl>ADSL connector, used as WAN port for connecting Internet Gate to the Internet using an ADSL/ADSL2/ADSL2+ connection.</if> +<if adsl> 
-<if fxo> Also an FXS connector, used to connect Internet Gate to global telephone network to make and receive ordinary telephone calls.</if>+[[:ADSL:start|ADSL]] connector, used as WAN port for connecting Internet Gate to the Internet using an ADSL/ADSL2/ADSL2+ connection. Uses middle two pins in connector. 
 +</if> 
 +<if fxo> 
 +[[:phone ports:start|FXO]] connector, used to connect Internet Gate to global telephone network to make and receive ordinary telephone calls. Uses outer two pins in connector. 
 +</if> 
 +<if !adsl and !fxo>Not used by your Internet Gate.</if> 
 + 
 +===== PH2, PH1 ===== 
 +<if fxs> 
 +[[:phone ports:start|FXS]] connectors allowing connection of up to 5 analogue telephones per port, converting them into IP-phones. PH1 and PH2 can have different SIP addresses (telephone numbers). 
 +<else> 
 +Not used by your Internet Gate. 
 +</if> 
 + 
 +===== ET0/WAN ===== 
 +<if et==5 and adsl> 
 +If ADSL is used as WAN connection ET0 is on the same subnet as ports ET1, ET2 and ET3. It can however be converted to be the WAN port on the [[:web GUI:Network page]] (disabling ADSL). 
 +</if> 
 +<if et==5 and !adsl> 
 +ET0 is the WAN port for connecting Internet Gate to the Internet using Ethernet. 
 +</if> 
 +<if et==4>Not present on your Internet Gate.</if> 
 + 
 +===== ET1, ET2, ET3 ===== 
 +Ethernet switch for connecting clients on your LAN to Internet Gate. All three ports are on the same subnet. 
 + 
 +===== ET4 ===== 
 +Ethernet port on a different subnet than ET1/2/3, allowing use of a second LAN, or a [[:network:DMZ]]. 
 + 
 +===== USB ===== 
 +<if usb> 
 +USB 2.0 master port accepting connection of [[:misc:USB|USB memory]]. 
 +<else> 
 +Not used by your Internet Gate. 
 +</if> 
 + 
 +===== Antenna ===== 
 +<if air> 
 +[[:wireless|Wireless access point]] with up to three virtual access points (different SSID-s and encryption), on a different subnet as LAN, or bridged to same subnet (controlled on [[:web GUI:Network page]]). 
 +<else> 
 +Not present on your Internet Gate. 
 +</if> 
 + 
 +===== DC, ON ===== 
 +Power supply connector and power button. 
product_overview/back_panel.1289386732.txt.gz · Last modified: 2010/11/10 11:58 by tibor
CC Attribution-Noncommercial-Share Alike 3.0 Unported
www.chimeric.de Valid CSS Driven by DokuWiki do yourself a favour and use a real browser - get firefox!! Recent changes RSS feed Valid XHTML 1.0