Differences

This shows you the differences between two versions of the page.

product_overview:back_panel [2010/11/10 12:10]
tibor
product_overview:back_panel [2010/11/18 13:19] (current)
tibor
Line 1: Line 1:
====== Back Panel ====== ====== Back Panel ======
-{{:ix78_back.jpg}}+{{:ix78_back.jpg}}\\
Note: Actual back panel of your Internet Gate model might differ from image above. Certain ports might be missing on cheaper models. Note: Actual back panel of your Internet Gate model might differ from image above. Certain ports might be missing on cheaper models.
===== LINE ===== ===== LINE =====
-<if adsl>[[:ADSL:start|ADSL]] connector, used as WAN port for connecting Internet Gate to the Internet using an ADSL/ADSL2/ADSL2+ connection.</if> +<if adsl> 
-<if fxo>[[:phone ports:start|FXO]] connector, used to connect Internet Gate to global telephone network to make and receive ordinary telephone calls.</if>+[[:ADSL:start|ADSL]] connector, used as WAN port for connecting Internet Gate to the Internet using an ADSL/ADSL2/ADSL2+ connection. Uses middle two pins in connector. 
 +</if> 
 +<if fxo> 
 +[[:phone ports:start|FXO]] connector, used to connect Internet Gate to global telephone network to make and receive ordinary telephone calls. Uses outer two pins in connector. 
 +</if>
<if !adsl and !fxo>Not used by your Internet Gate.</if> <if !adsl and !fxo>Not used by your Internet Gate.</if>
Line 15: Line 19:
</if> </if>
-<if et == 5> 
===== ET0/WAN ===== ===== ET0/WAN =====
-<if adsl>+<if et==5 and adsl>
If ADSL is used as WAN connection ET0 is on the same subnet as ports ET1, ET2 and ET3. It can however be converted to be the WAN port on the [[:web GUI:Network page]] (disabling ADSL). If ADSL is used as WAN connection ET0 is on the same subnet as ports ET1, ET2 and ET3. It can however be converted to be the WAN port on the [[:web GUI:Network page]] (disabling ADSL).
-<else>+</if> 
 +<if et==5 and !adsl>
ET0 is the WAN port for connecting Internet Gate to the Internet using Ethernet. ET0 is the WAN port for connecting Internet Gate to the Internet using Ethernet.
</if> </if>
 +<if et==4>Not present on your Internet Gate.</if>
 +
 +===== ET1, ET2, ET3 =====
 +Ethernet switch for connecting clients on your LAN to Internet Gate. All three ports are on the same subnet.
 +
 +===== ET4 =====
 +Ethernet port on a different subnet than ET1/2/3, allowing use of a second LAN, or a [[:network:DMZ]].
 +
 +===== USB =====
 +<if usb>
 +USB 2.0 master port accepting connection of [[:misc:USB|USB memory]].
 +<else>
 +Not used by your Internet Gate.
</if> </if>
 +
 +===== Antenna =====
 +<if air>
 +[[:wireless|Wireless access point]] with up to three virtual access points (different SSID-s and encryption), on a different subnet as LAN, or bridged to same subnet (controlled on [[:web GUI:Network page]]).
 +<else>
 +Not present on your Internet Gate.
 +</if>
 +
 +===== DC, ON =====
 +Power supply connector and power button.
 +
product_overview/back_panel.1289387438.txt.gz · Last modified: 2010/11/10 12:10 by tibor
CC Attribution-Noncommercial-Share Alike 3.0 Unported
www.chimeric.de Valid CSS Driven by DokuWiki do yourself a favour and use a real browser - get firefox!! Recent changes RSS feed Valid XHTML 1.0