Quick links:
Product Overview
Installation
Settings and Administration
ADSL
SIP Support
Telephone ports
Network
Firewall
Wireless
VPN
Misc
Licenses
Troubleshooting
This shows you the differences between two versions of the page.
product_overview:front_panel [2010/11/17 11:23] tibor |
product_overview:front_panel [2011/08/17 10:16] (current) tibor |
||
---|---|---|---|
Line 5: | Line 5: | ||
^ Indicators: ^^ | ^ Indicators: ^^ | ||
| AIR | Wireless (802.11b/g) | | | AIR | Wireless (802.11b/g) | | ||
- | | PH1 and PH2 | First and second telephone port (FXS) indicator | | + | | PH1 and PH2 | First and second telephone port (FXS) indicator\\ OFF – Phone not registered\\ Steady GREEN – Phone registered\\ Flashing RED – Dialing\\ Steady RED – In use\\ GREEN / RED flashing – Message waiting\\ RED strobe (1.3s off and 0.3s on) – Unavailable | |
- | | ::: | OFF – Phone not registered | | + | | LINE | Telephony gateway (FXO) indicator:\\ OFF – Not in use\\ Slow RED flash – Dialing / ringing\\ Fast RED flash – Extension selection\\ Steady RED – In use\\ RED strobe (1.3s off and 0.3s on) – Unavailable\\ \\ ADSL status indicator:\\ Slow GREEN flash - ADSL training\\ Steady GREEN - ADSL connected (FXO idle)\\ GREEN flicker - ADSL data sent or received | |
- | | ::: | Steady GREEN – Phone registered | | + | |
- | | ::: | Flashing RED – Dialing | | + | |
- | | ::: | Steady RED – In use | | + | |
- | | ::: | GREEN / RED flashing – Message waiting | | + | |
- | | ::: | RED strobe (1.3s off and 0.3s on) – Unavailable | | + | |
- | | LINE | Telephony gateway indicator | | + | |
- | | ::: | OFF – Not in use | | + | |
- | | ::: | Slow RED flash – Dialing / ringing | | + | |
- | | ::: | Fast RED flash – Extension selection | | + | |
- | | ::: | Steady RED – In use | | + | |
- | | ::: | RED strobe (1.3s off and 0.3s on) – Unavailable | | + | |
| USB | USB memory stick connected | | | USB | USB memory stick connected | | ||
- | | ET1-ET4 | Ethernet interface connected | | + | | ET0-ET4 | Ethernet interface connected | |
+ | <if et==4> | ||
| WAN | Status of the Internet connection | | | WAN | Status of the Internet connection | | ||
+ | </if> | ||
Light - The interface is connected. | Light - The interface is connected. | ||
Line 31: | Line 22: | ||
Three buttons allow you configure the unit: | Three buttons allow you configure the unit: | ||
^ Keys: ^^ | ^ Keys: ^^ | ||
- | | SET | Press and hold for two seconds to enter the [[settings_and_administration:front_panel_configuration|set-up mode]] | | + | | SET | Press and hold for three seconds to enter the [[settings_and_administration:front_panel_configuration|set-up mode]] | |
- | | SEL | Press to select between different displays/values. Press for two seconds to cancel any set-up. | | + | | SEL | Press to select between different displays/values.\\ Press for three seconds to cancel and leave [[settings_and_administration:front_panel_configuration|set-up mode]].\\ Press for 10 seconds to turn [[wireless:start|wireless access point]] on or off. | |
- | | ALT | Press to select firewall security profile. Press and hold for two seconds to allow [[web_gui:remote_config|remote configuration]]. | | + | | ALT | Press to select firewall security profile.\\ Press and hold for three seconds to allow [[web_gui:remote_config|remote configuration]]. | |
- | :!: Keys can be disabled on the [[web GUI:Administration page]]. | + | :!: Keys can be disabled on the [[web GUI:Administration page#Front Panel Buttons|Administration page]]. |
+ | |||
+ | By keeping some buttons pressed during power on unit can enter [[product overview:special modes]]. | ||
===== Display ===== | ===== Display ===== | ||
- | The 3-digit display shows status and allows [[settings_and_administration:front_panel_configuration|configuration]]. | + | The 3-digit display shows [[display|status]] and allows [[settings_and_administration:front_panel_configuration|configuration]]. |
Above and to the right of the 3 digits are small text indicators showing what is currently displayed: | Above and to the right of the 3 digits are small text indicators showing what is currently displayed: | ||
- | ^ Display: ^^ | + | ^ [[display|Normal]] mode: ^^ |
- | | AD | Displays IP address | | + | | AD | - | |
- | | CFG | Configure IP address | | + | | CFG | Configuration has been changed without saving it permanently.\\ Powering off unit will result in loosing your changes. | |
| DHP | - | | | DHP | - | | ||
- | | RST | Reset all configurations to factory defaults | | + | | RST | Unit is in [[troubleshooting:safe mode]], using default values temporarily. | |
| LQ | Line quality (SNR margin) | | | LQ | Line quality (SNR margin) | | ||
| TS | Transmit speed (Kbps) | | | TS | Transmit speed (Kbps) | | ||
| RS | Receive speed (Mbps) | | | RS | Receive speed (Mbps) | | ||
- | Read more about [[settings_and_administration:front panel configuration]]. | + | ^ [[settings_and_administration:front_panel_configuration|Configuration]] mode: ^^ |
- | + | | AD | View IP address / View MAC address | | |
+ | | CFG | Edit IP address / Save settings permanently | | ||
+ | | DHP | Read from USB | | ||
+ | | RST | Reset to factory defaults | | ||
+ | | LQ | Perform diagnostic test | | ||
+ | | TS | - | | ||
+ | | RS | Collect debug information | |