How to connect two Branches with a VPN Tunnel
To create an equal (symmetric, non-client-server style) connection between say two branch offices, each having its Internet Gate, set up them as a non-EasyClient client to the other respectively.
Both Internet Gates need to have static global IP addresses.
Both Internet Gates need to have different subnets for ET1.
On both Internet Gates:
- Make sure the unit has a different subnet for ET1 than at the other (ET1 subnet) end. If needed, change ET1 subnet on the Network Configuration page.
- Click Add in the VPN Connections field on the IPSec Overview page.
- On the IPSec Settings page that appears, disable Act as EasyClient .
- Enter the global IP address of the other Internet Gate in the Remote Gateway IP Address field.
- Enter the same pre-shared key or certificate.
- Enter the local subnet used at ET1 behind the other Internet Gate.
- Click Apply.
Now all PC:s connected to ports ET1/2/3 of one Internet Gate can connect to all PC:s connected to ports ET1/2/3 at the other end. To be able to use port ET4 or AIR the connections need to be tweaked on the advanced pages.
Both Internet Gates must have static IP addresses.
