Differences

This shows you the differences between two versions of the page.

troubleshooting:dead [2014/01/10 10:49]
tibor info about the time machine added
troubleshooting:dead [2014/01/10 10:54] (current)
tibor
Line 8: Line 8:
===== RST ===== ===== RST =====
If unit displays just RST for more than a minute then the firmware image in the unit has become damaged and cannot be loaded. If unit displays just RST for more than a minute then the firmware image in the unit has become damaged and cannot be loaded.
-You need to use the [[troubleshooting:lifeboat]] to load a new firmware image into the unit again. +If you have a dual-banked unit you can use the [[product_overview:special_modes|Time Machine]] to revert back to the firmware and configuration as it was before the last firmware upgrade
-If you have a dual-banked unit you can use the [[product_overview:special_modes|Time Machine]] to revert back to the firmware and configuration as it was before the last upgrade.+  - Hold SEL button pressed when powering on unit. 
 +  - Keep SEL button pressed until "Old" is shown in display. 
 +Now unit uses old firmware and configuration - like it was before last firmware upgrade. 
 +If "Old" does not show after one minute then your unit is not dual-banked, or the time machine cannot operate for some reason. Then you need to use the [[troubleshooting:lifeboat]] to load a new firmware image into the unit again.
===== CFG RST ===== ===== CFG RST =====
Line 33: Line 36:
====== Lifeboat ====== ====== Lifeboat ======
In most cases a seemingly dead unit can be brought back to life by using the [[troubleshooting:lifeboat]]. In most cases a seemingly dead unit can be brought back to life by using the [[troubleshooting:lifeboat]].
- 
troubleshooting/dead.txt · Last modified: 2014/01/10 10:54 by tibor
CC Attribution-Noncommercial-Share Alike 3.0 Unported
www.chimeric.de Valid CSS Driven by DokuWiki do yourself a favour and use a real browser - get firefox!! Recent changes RSS feed Valid XHTML 1.0