This is an old revision of the document!
Initial Installation
This topic describes the installation procedure for the most common installation scenario where the Internet Gate is used as a router on a local network to share a single connection to the Internet.
For other installation scenarios please refer to the installation information provided with your unit.
Hardware Installation
Connect the splitter supplied with your Internet Gate to the main telephone connector in your home. Connect Internet Gate's LINE port with the splitter. 1)
1)
Internet Gate is shipped with its ADSL modem configured as Internet connection. If you wish to use its ET0 Ethernet port instead for Internet connection then change WAN interface on the Network page.
1)
Internet Gate is shipped with its ADSL modem configured as Internet connection. If you wish to use its ET0 Ethernet port instead for Internet connection then change WAN interface on the Network page.
