Reset Internet Gate to Factory Default Settings

To reset the Internet Gate to factory default settings (same configuration as when delivered from factory):

  1. Press and hold SET for 2 seconds to enter set-up mode.
  2. Press SEL repeatedly until RST lights up.
  3. Press SET.
    Now “CLEAR ALL” is displayed, followed by “no”.
  4. Press SEL to change to “YES”
  5. Press SET to reset all settings and go back to factory default settings.

Alternative method:

  1. Hold SEL and ALT buttons pressed when powering on unit.
  2. Wait until RST and RS becomes lit.
  3. Release SEL and ALT buttons.
  4. Power off unit, then power it on again.

From web GUI:

  1. Click “Factory Reset” button at bottom of page
settings_and_administration/factory_defaults.txt · Last modified: 2010/11/17 12:51 by tibor
CC Attribution-Noncommercial-Share Alike 3.0 Unported Valid CSS Driven by DokuWiki do yourself a favour and use a real browser - get firefox!! Recent changes RSS feed Valid XHTML 1.0