Differences

This shows you the differences between two versions of the page.

--- settings_and_administration:installation [2010/11/11 13:57]
tibor created
+++ settings_and_administration:installation [2011/06/01 09:17] (current)
tibor
@@ Line 6: / Line 6: @@
 ===== Hardware Installation =====
 <if adsl>
-Connect the [[:adsl:start#splitter|splitter]] supplied with your Internet Gate to the main telephone connector in your home. Connect Internet Gate's **LINE** port with the splitter. ((Internet Gate is shipped with its [[:adsl:start|ADSL modem]] configured as Internet connection. If you wish to use its ET0 Ethernet port instead for Internet connection then change WAN interface on the [[web GUI:Network page]].))
+Connect the [[:adsl:start#splitter|splitter]] supplied with your Internet Gate to the main telephone connector in your home. Connect Internet Gate's **LINE** port with the splitter.\\
 <else>
 Connect the ET0 port of your Internet Gate to your Ethernet Internet connection - either a wall mounted Ethernet WAN port, or the Ethernet port of a modem you use for Internet connection.
 </if>
+Connect a PC to Internet Gate's ET1 port. The PC shall use DHCP to acquire its IP address and other settings (as it is default in Windows).
+Connect the power supply to Internet Gate and turn power on using the button on the [[:product overview:back panel]]. Internet Gate should now display first **RST**, then **CFG  RST**, then after a couple of seconds **HELLO** in its display.
+===== Connect to the web server =====
+Start a web browser on the PC attached to ET1 and enter **%%http://192.168.0.1%%** into the browser's address field.
+On the appearing [[web GUI:Login page]] click "Log in" and enter username **admin** password **admin**.
+:?: If you cannot browse to the Login page check [[troubleshooting:connect to GUI]] troubleshooting.
+===== Set up Internet Access =====
+If your Internet Provider doesn't require any special log in you should now be able to access the Internet. Try surf to an external web site (for instance http://www.google.com). If you manage to reach the Internet continue to "Configure unit" below.
+:?: Some Internet Providers require their users to log in before they can access the Internet. If you have received a **username** and a **password** from your Internet Provider then you need to enter those on the [[web GUI:Network page]] (select "Access type: Auto" to see the User and Password fields).
+Select Access type:Auto and click **Search** to allow Internet Gate to try to connect to your Internet Provider. If it fails then you need to enter access type information manually, consult your Internet Provider.
+:?: If you cannot reach the Internet check [[troubleshooting:Internet access problems]] troubleshooting.
+===== Configure unit =====
+Using the webpages reached from the [[web GUI:main menu]] you can now configure your unit.
+Configure LAN IP subnet used on the [[web GUI:Network page]].
+<if air>
+Configure Wireless Access Point on the [[web GUI:Wireless page]].
+</if>
+Change user **admin**'s password on the [[web GUI:Administration page]].
+Save your changes [[settings and administration:apply and save permanently|permanently]].
+===== Connect your LAN =====
+If you have more PC-s you can connect them to Ethernet ports ET2 and ET3 of the unit. Use Ethernet switches to connect more equipment.
+Port ET4 is on a different subnet than ports ET1/2/3 thus accessing equipment connected to ET4 may be more difficult. ET4 is on the other hand suitable for servers on a [[:network:DMZ]].
+<if fxs>
+Connect any analogue phones to [[:phone ports:start|ports PH1 and PH2]] to convert them to IP telephones.
+</if>

settings_and_administration/installation.1289480251.txt.gz · Last modified: 2010/11/11 13:57 by tibor

Show page Old revisions