Differences

This shows you the differences between two versions of the page.

settings_and_administration:installation [2010/11/11 14:29]
tibor
settings_and_administration:installation [2011/06/01 09:17] (current)
tibor
Line 23: Line 23:
===== Set up Internet Access ===== ===== Set up Internet Access =====
-If your Internet Provider doesn't require any special log in you should now be able to access the Internet. Try surf to an external web site (for instance: http://www.intertex.se). If you manage to reach the Internet continue to next header below.+If your Internet Provider doesn't require any special log in you should now be able to access the Internet. Try surf to an external web site (for instance http://www.google.com). If you manage to reach the Internet continue to "Configure unit" below.
:?: Some Internet Providers require their users to log in before they can access the Internet. If you have received a **username** and a **password** from your Internet Provider then you need to enter those on the [[web GUI:Network page]] (select "Access type: Auto" to see the User and Password fields). :?: Some Internet Providers require their users to log in before they can access the Internet. If you have received a **username** and a **password** from your Internet Provider then you need to enter those on the [[web GUI:Network page]] (select "Access type: Auto" to see the User and Password fields).
Line 30: Line 30:
:?: If you cannot reach the Internet check [[troubleshooting:Internet access problems]] troubleshooting. :?: If you cannot reach the Internet check [[troubleshooting:Internet access problems]] troubleshooting.
 +
 +===== Configure unit =====
 +Using the webpages reached from the [[web GUI:main menu]] you can now configure your unit.
 +
 +Configure LAN IP subnet used on the [[web GUI:Network page]].
 +
 +<if air>
 +Configure Wireless Access Point on the [[web GUI:Wireless page]].
 +</if>
 +
 +Change user **admin**'s password on the [[web GUI:Administration page]].
 +
 +Save your changes [[settings and administration:apply and save permanently|permanently]].
 +
 +===== Connect your LAN =====
 +If you have more PC-s you can connect them to Ethernet ports ET2 and ET3 of the unit. Use Ethernet switches to connect more equipment.
 +
 +Port ET4 is on a different subnet than ports ET1/2/3 thus accessing equipment connected to ET4 may be more difficult. ET4 is on the other hand suitable for servers on a [[:network:DMZ]].
 +
 +<if fxs>
 +Connect any analogue phones to [[:phone ports:start|ports PH1 and PH2]] to convert them to IP telephones.
 +</if>
settings_and_administration/installation.1289482186.txt.gz · Last modified: 2010/11/11 14:29 by tibor
CC Attribution-Noncommercial-Share Alike 3.0 Unported
www.chimeric.de Valid CSS Driven by DokuWiki do yourself a favour and use a real browser - get firefox!! Recent changes RSS feed Valid XHTML 1.0