Differences

This shows you the differences between two versions of the page.

--- sip:fent [2010/11/09 11:47]
tibor
+++ sip:fent [2010/11/09 11:49] (current)
tibor
@@ Line 3: / Line 3: @@
 The Internet Gate can enable SIP connectivity for remote users that use NAT devices without SIP support. It can adapt to characteristics of remote NAT devices.
-**Using FENT you can allow people behind non-SIP-capable NAT firewalls to register to your Internet Gate's SIP server.**
+**Using FENT you can allow people behind non-SIP-capable NAT firewalls to register on your Internet Gate's SIP server.**
 :!: You might need to purchase a [[:license]] to be able to use FENT in your unit.
@@ Line 9: / Line 9: @@
 You configure FENT on the [[:web GUI:Advanced SIP Settings]] page.
-FENT sends keep-alive packets to remote SIP clients behind non-SIP-capable firewalls to keep the SIP communications channel free to them. The keep-alive packets are SIP messages that are sent more often than the remote firewall's timeout.
+FENT sends keep-alive packets to remote SIP clients behind non-SIP-capable firewalls to keep the SIP communications channel open to them. The keep-alive packets are SIP messages that are sent more often than the remote firewall's timeout.
 {{:sip:fent_1.png|Far End NAT Traversal}}

sip/fent.1289299668.txt.gz · Last modified: 2010/11/09 11:47 by tibor