DHCP Server - Advanced

DHCP stands for Dynamic Host Configuration Protocol and is a protocol for auto-configuration of IP interfaces. Learn more about DHCP

Here you can specify which IP addresses the DHCP server should give to certain clients. (Usually this is not necessary - the DHCP server chooses addresses by itself from the specified address range.)

IP Address the IP address to be given to the client. Must be within the corresponding port's subnet, but does not need to be within the “From/To” range given to the DHCP server.

MAC address the unique MAC address of the client to receive the IP address.

Known hosts list of hosts known by this unit. The list can be used to ease configuration by pressing Add this host. (After that the IP address can be changed if desired.) Press “Apply” after you are finished.