Differences

This shows you the differences between two versions of the page.

--- web_gui:pptp_pass-through [2010/11/15 10:24]
mats
+++ web_gui:pptp_pass-through [2012/03/26 10:22] (current)
vopatek adding note about tcp port redirection.
@@ Line 78: / Line 78: @@
 you will get an error, as two pass-through tunnels are not allowed to go to the same remote server.
+===== The other way around - PPTP server on the LAN =====
+It is possible to have one single PPTP server on the LAN to be connected by one ore more remote PPTP clients.
+If so, first configure the PPTP pass-through as if the server on the LAN was a client:
+{{:web_gui:pptp-server.jpg|}}
+(In this example, the PPTP server is assumed to sit on the local IP address 192.168.0.9)\\
+Leave the **Remote server IP** empty.
+Then add "dport == pptp and proto == tcp modify static daddr 192.168.0.9" as an **additional rule** set on the WAN interface:
+{{:web_gui:pptp-servadd.jpg|}}
+If your WAN interface is ADSL, choose "LINE" instead in the first column.
+It is recommended to add the additional rule above instead of using the tcp port redirection fields.
+Adding a tcp port redirection would create two firewall rules instead of one.

web_gui/pptp_pass-through.1289813065.txt.gz · Last modified: 2010/11/15 10:24 by mats