Differences

This shows you the differences between two versions of the page.

web_gui:log_configuration_page [2012/03/02 10:08]
martinga added some missing stuff regarding the SIP log and telephone/IVR port logging configuration
web_gui:log_configuration_page [2012/03/02 10:14] (current)
martinga
Line 63: Line 63:
  * **Log SIP methods** - Filter logging of SIP messages by method. If the word "not" is prepended all SIP messages that not matches the methods listed will be logged. Examples: "not REGISTER" or "INVITE ACK BYE CANCEL".   * **Log SIP methods** - Filter logging of SIP messages by method. If the word "not" is prepended all SIP messages that not matches the methods listed will be logged. Examples: "not REGISTER" or "INVITE ACK BYE CANCEL".
  * **Log only communication with IP addresses** - Filter the logging of SIP messages. Only SIP messages sent or received to the given IP addresses are recorded into the SIP Log.   * **Log only communication with IP addresses** - Filter the logging of SIP messages. Only SIP messages sent or received to the given IP addresses are recorded into the SIP Log.
-  * **Log internal SIP messages** - SIP messages may be sent to/from internal applications of the box, with this setting enabled all messages will be logged. When disabled only message sent out or received from the network will be shown.+  * **Log internal SIP messages** - SIP messages may be sent to/from internal applications of the box, when this checkbox is checked all messages will be logged. Otherwise only message sent out or received from the network will be shown.
-  * **Log telephone port and IVR unit calls** - Use this checkbox to get a logging for each start and end of a call where a telephone port (FXS/FXO) or an IVR unit (auto attendant, conference unit, voicemail unit, testagent unit) is an endpoint. +This section contains also settings for the logging for telephone ports and built-in IVR units (auto attendant, conference unit, voicemail unit, testagent unit): 
-  * **Telephone ports and IVR units debug messages** - Use this checkbox to get a lot of debug output for each call where a telephone port (FXS/FXO) or an IVR unit (auto attendant, conference unit, voicemail unit, testagent unit) is an endpoint. Should only be enabled for debug purposes, because it needs quite a lot of processing power.+  * **Log telephone port and IVR unit calls** - Use this checkbox to get a logging for each start and end of a call where a telephone port (FXS/FXO) or an IVR unit is an endpoint. 
 +  * **Telephone ports and IVR units debug messages** - Use this checkbox to get a lot of debug output for each call where a telephone port (FXS/FXO) or an IVR unit is an endpoint. Should only be enabled for debug purposes, because it needs quite a lot of processing power.
The SIP log can be viewed on the [[SIP log page]] or forwarded to various receivers, see below. The SIP log can be viewed on the [[SIP log page]] or forwarded to various receivers, see below.
web_gui/log_configuration_page.1330679335.txt.gz · Last modified: 2012/03/02 10:08 by martinga
CC Attribution-Noncommercial-Share Alike 3.0 Unported
www.chimeric.de Valid CSS Driven by DokuWiki do yourself a favour and use a real browser - get firefox!! Recent changes RSS feed Valid XHTML 1.0