Differences

This shows you the differences between two versions of the page.

--- web_gui:pptp_pass-through [2011/02/18 12:59]
mats
+++ web_gui:pptp_pass-through [2012/03/26 10:22] (current)
vopatek adding note about tcp port redirection.
@@ Line 81: / Line 81: @@
 It is possible to have one single PPTP server on the LAN to be connected by one ore more remote PPTP clients.
-If so, first configure the PPTP pass-through as if the server on the LAN were a client:
+If so, first configure the PPTP pass-through as if the server on the LAN was a client:
+{{:web_gui:pptp-server.jpg|}}
+(In this example, the PPTP server is assumed to sit on the local IP address 192.168.0.9)\\
 Leave the **Remote server IP** empty.
-(In this example, the PPTP server is assumed to sit on the local IP address 192.168.0.9)
-Then add the following **additional rule**:
+Then add "dport == pptp and proto == tcp modify static daddr 192.168.0.9" as an **additional rule** set on the WAN interface:
-If your WAN interface is ADSL, choose "ET0" instead in the first column.
+{{:web_gui:pptp-servadd.jpg|}}
+If your WAN interface is ADSL, choose "LINE" instead in the first column.
+It is recommended to add the additional rule above instead of using the tcp port redirection fields.
+Adding a tcp port redirection would create two firewall rules instead of one.

web_gui/pptp_pass-through.1298030345.txt.gz · Last modified: 2011/02/18 12:59 by mats