System Log

The system log is a history of all system events (messages) and is used for support issues.

Each message has a timestamp, a source and a severity level.

Severity levels are:

• Emergency
• Alert
• Critical
• Error
• Warning
• Notice
• Info
• Debug

Debug messages are not logged by default. If support requests you, you have to enable logging of debug messages on the log configuration page.

During normal operation there is little need of monitoring the system log. You should consult the system log for messages if the unit is behaving incorrectly, or you have made some configuration but it is not activated. Check then for error messages.

Easiest way of copying the system log to e.g. an e-mail is using Ctrl+A, Ctrl+C

You can export the system log to various receivers (syslog server, SNMP server, e-mail, USB, etc) on the log configuration page.